Full Jacketed 3 Way Plug Valve (Lubricating Type)

Jket® brand Full Jacketed Three-Way Plug Valve, Lubricating Type, Metal to Metal Seated manufacturing and exports by our company since 2011 which is best suitable for High Temperature and High-Pressure Service with L Port and T Port.

Each Jacketed Taper Plug Valves Jacket testing carried out before assembly of valves to assure any leakages from any portion of inside / outside body and jacket fabrication.

Our manufacturing range of 3 Way Jacketed Plug Valves are Bolted Cover, Lubricating Type, Metal to Metal Seated, Taper Plug type, which suitable for various high temperature process media in form viscous, adhesive, slurry, high density and sticky media form which solidify on lower temperature.

For Lubrication on Lapped 3 Way Plug Seating surface, achieved by the help of valve sealant injected through the valve stem centre. The sealant is routed past a non-return valve (ball type check valve) and subsequently distributed via an internal network grooves machined into plug, ensuring effective coverage of the mating surfaces. However we are trying to operate the Three-Way Jacketed Plug Valve, a layer of lubricating sealant spread between seating surface area and valve operate smoothly.

The taper plug element is seated within a correspondingly tapered bore, generating a secure interference fit while still permitting fine positional adjustment to simultaneously ensure zero leakage and low operating torque. In the fully open configuration, the mating tapered interfaces between the plug and the valve body are isolated from direct contact with the process fluid, thereby mitigating degradation mechanisms such as corrosion and erosive wear to non-critical regions of the assembly. Furthermore, the valve incorporates a linear, unobstructed flow passage, resulting in minimum hydraulic resistance and negligible pressure drop across the device.

Each Full Jacketed 3 Way Plug Valves manufactured by us in L Port and T Port, sizes from 1" x 2" to 6" x 8", which mostly used in application where the medium freezes or solidifies at lower temperatures like bitumen, naphthalene, asphalt, coal tar, wax, polymer, resin, epoxy, adhesive, carbon, graphite, slurry etc. All Full Jacketed Valve flange sizes are one size higher than valve bore size to get proper bolting clearance after Jacket fabrication.